If Response Adjustment (Available Only With Option S93093/4A/B And Or S93900/1/2/4/5/7A/B Installed); Lfe Receiver Adjustment (Option 425) - Keysight N5247B Series Service Manual

2-port and 4-port pna-x microwave network analyzers

Hide thumbs Also See for N5247B Series:

Table of Contents

Tests and Adjustments

1. Press UTILITY

click EE Default Adjustment.

2. Follow the instructions and prompts as they are displayed.

IF Response Adjustment (Available Only with Option S93093/4A/B

and or S93900/1/2/4/5/7A/B Installed)

In A models these options were 090 and 093 or 094.

The IF Response adjustment is required when upgrading to Option 090, 093

and or 094. In addition, this adjustment must be performed each time a new

configuration is set up or if cables are changed:

1. Press UTILITY

click IF Response Adjustment.

2. Follow the instructions and prompts as they are displayed.

The LFE Receiver adjustment is required when upgrading to Option 205, 220,

405, 420, and 425. In addition, this adjustment must be performed each time a

new configuration is set up or if cables are changed.

1. Press UTILITY

click LFE Receiver Adjustment.

2. Follow the instructions and prompts as they are displayed.

1. Your model PNA may not have available all of the LFE Options listed.

Keysight N5247B Service Guide

Adjustment Routines

Adjustment Routines

Adjustment Routines

Troubleshooting