Step 4. A Model Pna/Pna-L/Pna-X And E836Xc Instruments Only (B Models Ignore This Step): Enable The Calpod Firmware License (Option 301 Or 302); Confirm The Pna Model, Firmware Revision, And Installed Options - Keysight CalPod 855 A Series Service Manual

Usage Information
Setup and Use of Keysight 855xxA/B Series CalPods
Step 4. A Model PNA/PNA-L/PNA-X and E836xC Instruments Only (B
Models Ignore This Step):
Enable the CalPod Firmware License (Option 301 or 302)
For A model PNA/PNA-X/PNA-L's and E8456xC instruments, if you have do not
have Option 301 or 302 installed, contact Keysight. Refer to
Keysight" on page
To use the CalPod Installation Package that was downloaded in
the CalPod Installation Package" on page
(301 or 302) has to be enabled using a keyword that is specific for your PNA model
and serial number. This keyword was sent to you by Keysight. Use the following
instructions to enter the keyword in the PNA using the PNA front panel HARDKEYs
and [softkeys].
1. On the PNA, press SYSTEM > [Service] > [Option Enable].
2. In the Option Enable dialog box, use the pull-down menu to select the CalPod
firmware option you bought with your initial purchase. If you don't know which
option was purchased, refer to the papers in the shipment container.
3. Enter the keyword.
4. Select Permanent > Enable.
5. Click Yes to restart the PNA and enable the new firmware.
6. Click Exit.
Step 5. Confirm the PNA Model, Firmware Revision, and Installed Options
1. If not already active, start the PNA application.
2. Select the Help pull down menu.
3. Select About Network Analyzer and note the following:
4. Compare the information you just noted with the information in
your PNA is not compatible with your CalPods, or if Option 301 or 302 is not
installed, contact Keysight. Refer to
have an old version of PNA firmware, go to
http://na.support.keysight.com/pna/firmware and download the latest version.
5. Select OK.
6. Select the File pull down menu and select Minimize Application.
Table 1-2 PNA Models, Firmware, Firmware Options Required for 855xxA/B Series CalPods
85563-90005 Operation & Service Guide
3-1. See also,
a. PNA model.
b. PNA firmware (application code) version.
c. PNA option 301 or 302 is installed.
Table 1-2 on page 1-10.
1-7, the CalPod firmware license option
"Contacting Keysight" on page
"Contacting
"Step 3. Download
Table 1-2. If
3-1. If you
1-11