Avaya Communication Manager Administrator's Manual page 723

COVERAGE POINTS
Point1, Point2, Point3, Point4, Point5, Point6
The alternate destinations that comprise a coverage path. Coverage points must be assigned sequentially
beginning with Point 1 (do not leave gaps). Each path can have up to six coverage points.
Valid entries
extension
attd
h1 to h999
c1 to c750
c1 to c1000 (For
S8300 Media
Server, S8700
IP-Connect, S8700
Multi-Connect)
r1 to r999
r1 to r1000 (For
S8300 Media
Server, S8700
IP-Connect, S8700
Multi-Connect)
v + extension
If calls redirect to an AUDIX in a DCS network, administer a unique Hunt Group screen. Assign the
AUDIX extension in the
Message Center
field to rem-audix.
If calls redirect to Message Center (a special Uniform Call Distribution hunt group), AUDIX, or to the
attendant, do not list any subsequent coverage points. These calls will normally queue and never redirect
to another coverage point. Calls to any hunt group will queue if possible. Calls redirect from a hunt group
only if all hunt group members are busy and either the queue is full or there is no queue.
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Redirects the call to an internal extension or announcement.
NOTE:
If entering a Multi-Location Dial Plan shortened
extension, see the Caution note on page 632.
Redirects the call to the attendant or attendant group. If the
system has Centralized Attendant Service (CAS), the call goes
to the CAS attendant.
Redirects the call to the corresponding hunt-group. For
example, enter "h32" if you want a coverage point routed to
hunt group 32. (See Hunt Group
information.)
Redirects the call to the corresponding coverage answer group.
For example, enter "c20" if you want a coverage point routed to
call coverage answer group 20. (See
on page 719 for more information.)
Redirects the call to the corresponding remote coverage point
number. For example, enter "r27" if you want a coverage point
routed to remote coverage point 27. (See
Table on page 1121 for more information.)
Redirects the call to the corresponding VDN extension. For
example, enter "v12345" if you want the last administered
coverage point to be the VDN associated with extension 12345.
Note that a Vector Directory Number may be used only as the
last administered point in a coverage path.
Group Extension field. If the AUDIX is connected to the local node, set the
field to audix; if the AUDIX is connected to another node, set the
on page 894 for more
Coverage Answer Group
Remote Call Coverage
Message Center
Screen Reference
Coverage Path
723