Avaya Communication Manager Administrator's Manual page 711

DID-LDN Only to LDN Night Ext.
Valid
entries
y
n
Ext Alert Port (TAAS)
Enter the seven-digit port number assigned to the external alerting device. This supports the Night
Service — Trunk Answer From Any Station feature.
NOTE:
Type an X in this field to indicate that there is no hardware associated with this port
assignment. If an X is used here, you must also fill in the
field.
Ext Alert (TAAS) Extension
Appears only when an X is entered in the
Terminal Translation Feature (TTI) to assign a port to the Ext Alert Port from a station on the Ext Alert
port during system installation or provisioning. Once a port is assigned (either via TTI or by changing the
field from the G3-MA or other manager terminal) the extension is automatically removed
Ext Alert Port
and treated as unassigned.
IAS Att. Access Code
Enter the extension number of the attendant group at the main server running Avaya Communication
Manager. This entry is required when IAS Branch is y. Does not appear if, on the
Customer-Options
IAS (Branch)
Enables or disables Inter-PBX Attendant Service (IAS) Branch feature. Does not appear if, on the
System-Parameters Customer-Options screen, the
NOTE:
CAS and IAS cannot both be active at the same time.
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Enter y to allow only listed directory number (LDN) calls to go to
the listed directory night service extension.
Enter n if you want all attendant seeking calls to route to the LDN
night service extension.
Ext Alert Port (TAAS)
screen, the
Centralized Attendant
Ext Alert (TAAS) Extension
field. This extension is used by the
field is y.
Centralized Attendant field is y.
Screen Reference
Console Parameters
System-Parameters
711