Avaya Communication Manager Administrator's Manual page 735

Enable Link
Used with X.25, Point-to-Point, and Processor Interface data modules. See Administration for Network
Connectivity for Avaya Communication Manager for more information. This field is in different locations
on the screen for different data module types.
Endpoint Type
Used with X.25 Data Modules. An endpoint type is a type of packet switched data endpoint that uses
X.25 call control procedures. The X.25 Endpoint connects to external ports on the PGATE board and to
the TDM bus via a DS1 trunk. Ports connected to the adjunct endpoint can be either DTEs or DCEs. The
type of endpoint (DTE or DCE) is administrable on the "data-mod" screen.
Valid entries
adjunct
Error Logging
Used with X.25 Data Modules.
Valid entries
y/n
Establish Connection
Used with X.25, Point-to-Point, and Processor Interface (used with DEFINITY CSI and SI only) data
modules. See Administration for Network Connectivity for Avaya Communication Manager for more
information.
Highest PVC Logical Channel
A display-only field used with X.25 Data Modules. Appears when the
y. Specifies how the above endpoint type acts.
Valid entries
through
1 64
IP Address Negotiation
Used with Point-to-Point data modules. Does not appear for S8700 IP-Connect. See Administration for
Network Connectivity for Avaya Communication Manager for more information.
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Mandatory entry
Usage
Enter y to record X.25 protocol errors in the hardware error log.
See the Maintenance for Avaya Communication Manager and
DEFINITY® Server manual for your model for more information
about error logs.
Usage
Indicates that 1 to 64 Logical Channels are allowed on this port.
Screen Reference
Data modules
Permanent Virtual Circuit field is
735