Alert Station; Alert Pager; Crisis Alert Code - Avaya Communication Manager Administrator's Manual

ALERT STATION

Every User Responds
Controls who needs to respond to a crisis alert.
Valid entries
y
n

ALERT PAGER

Alert Pager
Valid entries
y/n

Crisis Alert Code

Displays when the
Valid entries
1 through 3
digits
DTMF Duration - Tone (msec)
The length of time the Dual-Tone Multi-Frequency (DTMF) tone is heard for each digit. Displays when
the
Alert Pager
Valid entries
20 through
2550
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
If set to y, all users who have a crisis alert button are notified and
must clear the alert for every emergency alert. Assign crisis alert
buttons only to attendant consoles and stations that must be notified
of an emergency call.
If set to n, all users are notified, but only one user needs to
acknowledge an alert. This user may be the attendant or any other
digital telephone with a crisis alert button. When the alert is
acknowledged by one user, the alert is cleared at all stations except
the one that acknowledged the alert.
Usage
Enter y to use Crisis Alert to a Digital Pager.
field is y. This field requires an entry before submitting the screen.
Alert Pager
Usage
The numbers in this field are the first 3 digits in the crisis alert pager
message. Avaya recommends you enter the numbers used to call the
local emergency service or any digits used for an emergency
situation (for example, 911).
field is y.
Usage
Enter a number in increments of 10.
Screen Reference
Crisis Alert System Parameters
725