Avaya Communication Manager Administrator's Manual page 694

Screen Reference
Class of Restriction
Block Transfer Display
Valid entries
y/n
Brazil Collect Call Blocking
For Brazil only
Valid entries
y/n
MF Incoming Call Trace
Valid entries
y/n
Remote Logout of Agent
Use a feature access code to logout an idle ACD or EAS agent without being at the agent's phone.
Valid entries
y/n
Station Lock COR
This field defaults to the current screen COR. Extensions that are assigned this COR can use Station Lock
with the access code administered on the FAC screen.
Valid entries
0 through 95
694
Usage
Enter y to prevent users of DCP, Hybrid, ISDN-BRI, or wireless
display telephones from receiving a confirmation message when
they transfer a call.
Usage
Enter y to permit all Brazilian trunks calls that terminate to a station
to send back a double answer to the CO. This double answer tells
the CO that this particular station cannot accept collect calls. The
CO then tears down the call if it is a collect call. Set
Trunk Group screen to 23 and set this field to y.
Usage
Enter y to allow assignment of a Call Trace COR to a station. Avaya
Communication Manager then generates an MFC backward signal
(administered on the System-Parameters Multifrequency-Signaling
screen) during call setup instead of the "free" signal. This triggers
the central office to collect trace information before releasing the
calling party, if the terminating station's COR has this feature set to
y.
Usage
Enter y to allow remote logout of an idle ACD or EAS agent.
Usage
This field defaults to current COR.
Administrator's Guide for Avaya Communication Manager
Country on the
November 2003