Cdr System Parameters - Avaya Communication Manager Administrator's Manual

Screen Reference

CDR System Parameters

Ext Len
Valid entries
1 to 7 or blank
System CESID Default
Valid entries
1 to 16 digits
Total Length
Valid entries
1–16 or blank
CDR System Parameters
Use the Call Detail Recording (CDR) System Parameters screen to set parameters for the types of calls
you want to record and how to format the information. You can use CDR records to determine call costs,
diagnose problems, detect abuse, and optimize your network.
Field descriptions for page 1
Figure 131: CDR System Parameters screen
change system-parameters cdr
Node Number (Local PBX ID):
Primary Output Format: printer
Secondary Output Format:
Use Enhanced Formats? n
Modified Circuit ID Display? n
Suppress CDR for Ineffective Call Attempts? y
Disconnect Information in Place of FRL? n
Force Entry of Acct Code for Calls Marked on Toll Analysis Form? n
Record Called Vector Directory Number Instead of Group or Member? n
Record Agent ID on Incoming? n
Inc Trk Call Splitting? n
Record Non-Call-Assoc TSC? n
Record Call-Assoc TSC? n
Privacy - Digits to Hide: 0
668
Usage
Enter the number of digits in the extension.
Usage
Enter a default CESID. This number will be sent over the CAMA
trunk if the field does not have an entry.
Ext Code
Usage
Enter the total number of digits to send.
CDR SYSTEM PARAMETERS
Use ISDN Layouts? n
Record Outgoing Calls Only? y
Administrator's Guide for Avaya Communication Manager
CDR Date Format: month/day
Primary Output Endpoint: CDR1
EIA Device Bit Rate: 9600
Condition Code 'T' for Redirected Calls? n
Remove # From Called Number? n
Attendant Call Recording? y
Interworking Feat-flag? n
Calls to Hunt Group - Record: member-ext
Record Agent ID on Outgoing? n
Digits to Record for Outgoing Calls: dialed
CDR Account Code Length: 4
Page 1 of 1
Intra-switch CDR? n
CDR Call Splitting? y
November 2003