Avaya Communication Manager Administrator's Manual page 670

Screen Reference
CDR System Parameters
Condition Code 'T' for Redirected Calls
You can elect to identify CDR records of calls that have been redirected automatically off the server
running Avaya Communication Manager.
Valid entries
y
n
Digits to Record for Outgoing Calls
Valid entries
dialed
outpulsed
Disconnect Information in Place of FRL
See Call detail record field descriptions
Valid entries
y
n
EIA Device Bit Rate
Applies to DEFINITY SI only. Displays if either
Valid entries
300
1200
2400
4800
9600
670
Usage
The Condition Code of both CDR records for the call will be 'T.'
The Condition Codes normally associated with the
field are generated.
Outgoing Calls Only
Usage
Use dialed to record the digits a user actually dials.
Use outpulsed to record the digits that Communication Manager
actually sends out over the trunk, including any additions or
deletions that take place during routing.
on page 1460 for more information.
Usage
Enter y to replace the
Facility Restriction Level (FRL)
information about why a call disconnects. You can use this
information to isolate problems between the DEFINITY R and the
telephone network.
Enter n to record the call's FRL.
Enter the baud rate of the CDR device connected to the EIA port.
Administrator's Guide for Avaya Communication Manager
Record
field with
Primary or Secondary Output Format field is eia.
November 2003