Avaya Communication Manager Administrator's Manual page 675

Record Called Vector Directory Number
Instead of Group or Member
If this option is enabled, the called VDN overrides the group or member information that normally
appears in the
Dialed Number
the first VDN used for the call is stored. This applies only to calls routed to a hunt group by a vector, not
to calls routed directly to an extension by a vector.
You cannot use both the
these fields can be y.
Valid entries
y/n
Record Non-Call-Assoc TSC
A temporary signaling channel (TSC) is a virtual connection established within an ISDN D-channel. For
more information, see the DEFINITY® Communications System Generic 2.2 and Generic 3 V2
DS1/CEPT1/ISDN PRI Reference.
Valid entries
y/n
Record Outgoing Calls Only
Valid entries
y
n
Remove # From Called Number
Valid entries
y
n
Administrator's Guide for Avaya Communication Manager
November 2003
field of the CDR record. If a call is directed through more than one VDN,
and the
Called VDN Agent Login ID
Usage
Enter y to include the Vector Directory Number (VDN) in the
Dialed Number field of a CDR record.
Usage
Enter y to create records for non-call-associated temporary signaling
connections. If you have a lot of data connections this could increase
the number of records. You may want to consider the capacity of
your record collection device.
Usage
Enter y to record only outgoing calls. This can save space if you
are only concerned with charges for outbound calls.
Enter n to record both outgoing and incoming calls.
Usage
Enter y to have the "#" (or "E") symbol removed from the
Number field of the call detail record. You might need to verify that
your output device can accept this format.
Enter n to have the trailing "#" (or "E") symbol appear in the
field whenever inter-digit time out occurs or users
Dialed Number
dial # to indicate the end of dialing.
Screen Reference
CDR System Parameters
instead of or
Group Member
Dialed
. Only one of
675