Intel 6 SERIES CHIPSET - DATASHEET 01-2011 Datasheet page 489

Hide thumbs Also See for 6 SERIES CHIPSET - DATASHEET 01-2011:
Table of Contents

Advertisement

LPC Interface Bridge Registers (D31:F0)
13.4.7
OCW1—Operational Control Word 1 (Interrupt Mask)
Register
Offset Address: Master Controller
Default Value:
Bit
Interrupt Request Mask — R/W. When a 1 is written to any bit in this register, the
corresponding IRQ line is masked. When a 0 is written to any bit in this register, the
7:0
corresponding IRQ mask bit is cleared, and interrupt requests will again be accepted by
the controller. Masking IRQ2 on the master controller will also mask the interrupt
requests from the slave controller.
13.4.8
OCW2—Operational Control Word 2 Register
Offset Address: Master Controller
Default Value:
Following a part reset or ICW initialization, the controller enters the fully nested mode
of operation. Non-specific EOI without rotation is the default. Both rotation mode and
specific EOI mode are disabled following initialization.
Bit
Rotate and EOI Codes (R, SL, EOI) — WO. These three bits control the Rotate and
End of Interrupt modes and combinations of the two.
000 = Rotate in Auto EOI Mode (Clear)
001 = Non-specific EOI command
010 = No Operation
011 = *Specific EOI Command
7:5
100 = Rotate in Auto EOI Mode (Set)
101 = Rotate on Non-Specific EOI Command
110 = *Set Priority Command
111 = *Rotate on Specific EOI Command
*L0 – L2 Are Used
4:3
OCW2 Select — WO. When selecting OCW2, bits 4:3 = 00
Interrupt Level Select (L2, L1, L0) — WO. L2, L1, and L0 determine the interrupt
level acted upon when the SL bit is active. A simple binary code, outlined below, selects
the channel for the command to act upon. When the SL bit is inactive, these bits do not
have a defined function; programming L2, L1 and L0 to 0 is sufficient in this case.
2:0
Datasheet
Slave Controller
00h
Slave Controller
Bit[4:0]=undefined, Bit[7:5]=001
Code
Interrupt Level
000b
IRQ0/8
001b
IRQ1/9
010b
IRQ2/10
011b
IRQ3/11
021h
Attribute:R/W
0A1h
Size:
8 bits
Description
020h
Attribute:
0A0h
Size:
Description
Code
Interrupt Level
000b
001b
010b
011b
WO
8 bits
IRQ4/12
IRQ5/13
IRQ6/14
IRQ7/15
489

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

6 series

Table of Contents