Intel 6 SERIES CHIPSET - DATASHEET 01-2011 Datasheet page 413

Hide thumbs Also See for 6 SERIES CHIPSET - DATASHEET 01-2011:
Table of Contents

Advertisement

Chipset Configuration Registers
Bit
2
1
0
10.1.83
CIR24—Chipset Initialization Register 24
Offset Address: 3A28–3A2Bh
Default Value:
Bit
31:0
10.1.84
CIR25—Chipset Initialization Register 25
Offset Address: 3A2C–3A2Fh
Default Value:
Bit
31:0
10.1.85
CIR26—Chipset Initialization Register 26
Offset Address: 3A6C–3A6Fh
Default Value:
Bit
31:0
10.1.86
CIR27—Chipset Initialization Register 27
Offset Address: 3A80–3A83h
Datasheet
RMH 1 Upstream Wake on OC Disable This bit governs the hub behavior when
globally suspended and the system is in Sx.
0 = Enables the port to be sensitive to over-current conditions as system wake-up
events. That is, the hub will initiate a resume on its upstream port and cause a
wake from Sx when an OC condition occurs on an enabled DS port
1 = Over-current event does not initiate a wake upstream and does not cause a wake
from Sx
RMH 1 Upstream Wake on Disconnect Disable This bit governs the hub behavior
when globally suspended and the system is in Sx
0 = Enables disconnect events on downstream port to be treated as resume events
to be propagated upstream. In this case, it is allowed to initiate a wake on its
upstream port and cause a system wake from Sx in response to a disconnect
event on a downstream port
1 = Downstream disconnect events do not initiate a resume on its upstream port or
cause a resume from Sx.
RMH 1 Upstream Wake on Connect Enable This bit governs the hub behavior
when globally suspended and the system is in Sx.
0 = Enables connect events on a downstream port to be treated as resume events to
be propagated upstream. As well as waking up the system from Sx.
1 = Downstream connect events do not wake the system from Sx nor does it initiate
a resume on its upstream port.
00000000h
CIR24 Field 1 — R/W. BIOS must program this field to 01010000h.
00000000h
CIR25 Field 1 — R/W. BIOS must program this field to 01010404h.
00000000h
CIR26 Field 1 — R/W. BIOS must program this field to 00000001h.
Description
Attribute:
R/W
Size:
32-bit
Description
Attribute:
R/W
Size:
32-bit
Description
Attribute:
R/W
Size:
32-bit
Description
Attribute:
R/W
413

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

6 series

Table of Contents