Avaya S8700 Maintenance Manual page 224

Additional Maintenance Procedures
Test Call Results
If the test call successfully completes, and every trunk tests within
administered thresholds for marginal and unacceptable performance, then
a PASS result is returned.
If the test aborts or fails, an error code indicating the cause is returned.
The error codes are explained in the CO-TRK and TIE-TRK sections of
''ABRI-PORT (ASAI ISDN-BRI Port)'' on page
When the trunk is being used for call processing, the test aborts.
When the trunk is already being tested by maintenance software, the test is
queued and run when the maintenance activity finishes.
Measurement data gathered by analog testcalls can be retrieved with the list
testcalls command as described in
page 5-39. The measurements that are made and recorded depend on the type
of test that is specified and the capabilities of the far-end TTL.
Screen 5-1 shows a typical result for test analog-testcall trunk 60
test analog-testcall trunk 60
Port Maintenance Name
02B1901 TIE-TRK
02B1902 TIE-TRK
02B1903 TIE-TRK
02B1904 TIE-TRK
02B1905 TIE-TRK
02B1906 TIE-TRK
Screen 5-1. Test Results for test analog-testcall trunk 60
5-38 Issue 1 May 2002
''ATMS Reports (List Testcall Command)'' on
TEST RESULTS
Alt. Name Test No. Result
060/001 845
060/002 845
060/003 845
060/004 845
060/005 845
060/006 845
8-3.
Error Code
PASS
PASS
PASS
ABORT 1004
PASS
ABORT 1004
555-233-143