Avaya S8700 Maintenance Manual page 219

Removing and Restoring Power
Removing and Restoring Power from the Media
Server
The media server is shut down from the media server web interface.
To shut down a server:
1. On the web interface main menu, under Server, click Shutdown This
Server.
2. On the Shutdown This Server screen, choose one of the following options:
3. If you want the server to reboot after shutdown, click the check box next to
After shutdown, restart system.
4. Click Shutdown.
If you selected a delayed shutdown, you will see the shutdownproc accepted
message, indicating that the global shutdown is in progress. An immediate
shutdown terminates contact with the server so no message is displayed.
To restore power to the media server:
1. Follow these steps to open the bezel door to access the power switch:
a. Grasp the tab at each end of the hinged bezel door.
b. Gently pull the tabs out and down to swing open the hinged bezel
2. Press the power switch to apply power to the server, then close the bezel
door.
The lit green LED indicates that power is restored.
555-233-143
Delayed. This is the default option. When you choose this option,
the system notifies all processes that the server will be shut down.
The system then waits for the processes to close files and perform
other clean-up activities before it shuts the server down.
Immediate. When you choose this option, the system does not wait
for processes that are running to terminate normally before it shuts
the server down. When you shut the server down immediately, data
may be lost.
door.
Issue 1 May 2002 5-33