Forward-Delay; Hello-Time - Dell Force10 S4810P Reference Manual

forward-delay

The amount of time the interface waits in the Blocking State and the Learning State before transitioning to the
Forwarding State.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax forward-delay seconds
To return to the default setting, use the no forward-delay command.
Parameters
seconds
Defaults 15 seconds
Command Modes MULTIPLE SPANNING TREE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.5.1.0
Related
max-age
Commands

hello-time

hello-time
Set the time interval between generation of MSTB bridge protocol data units (BPDUs).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax hello-time seconds
To return to the default value, use the no hello-time command.
Parameters
seconds
Defaults 2 seconds
Command Modes MULTIPLE SPANNING TREE
Enter the number of seconds the interface waits in the Blocking State
and the Learning State before transiting to the Forwarding State. The
range is 4 to 30. The default is 15 seconds.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
– changes the wait time before MSTP refreshes protocol configuration information.
– changes the time interval between bridge protocol data units (BPDUs).
Enter a number as the time interval between transmission of BPDUs.
The range is 1 to 10. The default is 2 seconds.
1103