Ipv6 Neighbor - Allied Telesis IE220 Series Manual

IP 6 C
V OMMANDS
6
IPV NEIGHBOR

ipv6 neighbor

Overview Use this command to add a static IPv6 neighbor entry.
Use the no variant of this command to remove a specific IPv6 neighbor entry.
Syntax ipv6 neighbor <ipv6-address> <vlan-name> <mac-address>
<port-list>
no ipv6 neighbor <ipv6-address> <vlan-name> <port-list>
Mode Global Configuration
Usage notes Use this command to clear a specific IPv6 neighbor entry. To clear all dynamic
address entries, use the
Example To create a static neighbor entry for IPv6 address 2001:0db8::a2, on vlan2, with
MAC address 0000.cd28.0880, on port1.0.1, use the command:
awplus#
awplus(config)#
0000.cd28.0880 port1.0.1
Related clear ipv6 neighbors
commands
show ipv6 neighbors
C613-50644-01 Rev B
Parameter Description
<ipv6-address>
Specify the neighbor's IPv6 address in the format X:X::X:X.
<vlan-name>
Specify the neighbor's VLAN name.
<mac-address>
Specify the MAC hardware address in hexadecimal notation in
the format HHHH.HHHH.HHHH.
<port-list>
Specify the port number, or port range.
configure terminal
ipv6 neighbor 2001:0db8::a2 vlan2
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
clear ipv6 neighbors command.
928