Table of Contents
Advertisement
AC Power Connector
AT-S25 Management Software and Omega Management
Interface
The switch has a single AC power supply socket on the back panel,
which has autoswitch AC inputs. The input voltage range is from
100-120/200-240 VAC, 4/2A, 50/60 Hz. The power cord acts as an ON/
OFF switch.
The AT-S25 software is the management program for the switch, and
it comes pre-installed on the unit. Included with the AT-S25 software
is the Omega management interface. This menu oriented interface
makes it easy for you to manage the system. With Omega, you can
perform all of the tasks necessary to configuring and monitoring the
system, such as creating VLANs, assigning operational parameters to
the switch, such as an IP address and gateway address, and viewing
switch statistics, all through menu selections and easy-to-use
windows.
In a network environment where you have created a stack of
Ethernet switches, you will use the Omega management interface to
manage all of the switches in the stack as a unit, that is, as one logical
switch. You will not manage each switch in a stack separately.
There are several different methods for accessing the Omega
management interface on an Ethernet switch:
# RS-232 connector on the switch
# Web browser
# Telnet program
# SNMP network management program
The Omega interface functions the same and has the same
capabilities regardless of the method you choose to access it. The
program has security features that allow you to disable one or more
of the access methods to prevent unauthorized access to a switch.
The program also has a password security feature.
Note
For instructions on how to access and how to use the Omega
management interface, refer to the AT-S25 Management
Software User's Manual. This guide is available from the Allied
Telesyn web site at www.alliedtelesyn.com/techhome.htm.
AT-8316F and AT-8324 Installation Guide
25
Advertisement
Table of Contents
