Policy Condition 802.1P - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

QoS Policy Commands

policy condition 802.1p

Configures the 802.1p value for a policy condition.
policy condition condition_name 802.1p 802.1p_value
policy condition condition_name no 802.1p
Syntax Definitions
condition_name
802.1p_value
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Use the no form of the command to remove an 802.1p value for a condition; however, at least one clas-
sification parameter must be associated with a condition.
•
The 802.1p policy condition classifies double-tagged traffic (for example, VLAN Stacking packets)
based on the 802.1p value of the outer VLAN tag of the packet.
Examples
-> policy condition cond3 802.1p 7
Release History
Release 6.6.1; command was introduced.
Related Commands
qos apply
policy condition
show policy condition
MIB Objects
alaQoSConditionTable
alaQoSConditionName
alaQoSCondition8021p
OmniSwitch CLI Reference Guide
The name of the condition. May be an existing condition name or a new
condition.
The 802.1p value in the 802.1Q VLAN tag for the flow. Values range
from 0 (lowest priority) to 7 (highest priority).
Applies configured QoS and policy settings to the current configuration.
Creates a policy condition.
Shows information about policy conditions configured on the switch.
November 2009 page 39-99