L2Tp Retransmission - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

l2tp retransmission

l2tp retransmission retries [ established | not-established ]
Syntax
no l2tp retransmission [ retries ] [ established | not-established ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the number of retransmission retries, and allows you to apply the retry count
Description
to established and/or unestablished tunnels. If you do not include a keyword, the
router applies the retry count to all tunnels. The no version resets the number of
retransmissions to the default value, 5.
Options
Global Configuration
Mode
retries Number in the range 2–30
established Applies the retry count only to established tunnels
not-established Applies the retry count only to tunnels that are not established
Chapter 12: L Commands
1167
l2tp retransmission