Ip Dvmrp Metric-Offset - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

ip dvmrp metric-offset

[ no ] ip dvmrp metric-offset { in | out } [ increment ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Adjusts the number of hops associated with routes passing through an interface. This
Description
action indicates that the route is more efficient or less efficient than an alternative
route. The no version restores the default values.
Options
Interface Configuration
Mode
772
ip dvmrp metric-offset
in Increments the number of hops for a DVMRP route advertised in incoming
DVMRP reports. If you do not specify a key word, this option is the default.
out Increments the number of hops for a DVMRP route advertised in outgoing
DVMRP reports
increment Number of hops associated with this interface; default value is 1 for
incoming reports and 0 for outgoing reports.