Configuring 802.1X Radius Policies - Alcatel-Lucent 7450 System Management Manual

Configuring RADIUS Accounting

Configuring 802.1x RADIUS Policies

Use the following CLI commands to configure generic authentication parameters for clients using
802.1x EAPOL. Additional parameters are configured per Ethernet port. Refer to the 7450 ESS
Interface Configuration Guide.
To configure generic parameters for 802.1x authentication, enter the following CLI syntax.
CLI Syntax: config>system>security
The following displays a 802.1x configuration example:
A:ALA-1>config>system>security# info
----------------------------------------------
...
----------------------------------------------
A:ALA-1>config>system#
Page 90
dot1x
radius-plcy policy-name
server server-index address ip-address secret key [port
port]
source-address ip-address
no shutdown
dot1x
radius-plcy "dot1x_plcy" create
server 1 address 1.1.1.1 port 65535 secret "a"
server 2 address 1.1.1.2 port 6555 secret "a"
source-address 1.1.1.255
no shutdown
7450 ESS System Mangement Guide