Ftp Timeout - 3Com S7906E Command Reference Manual

undo ftp server
View
System view
Default Level
3: Manage level
Parameters
None
Description
Use the ftp server enable command to enable the FTP server.
Use the undo ftp server command to disable the FTP server.
By default, the FTP server is disabled to prevent attacks.
Examples
# Disable the FTP server.
<Sysname> system-view
[Sysname] undo ftp server
% Close FTP server

ftp timeout

Syntax
ftp timeout minute
undo ftp timeout
View
System view
Default Level
3: Manage level
Parameters
minute: Idle-timeout timer in minutes, in the range 1 to 35791. The default is 30 minutes.
Description
Use the ftp timeout command to set the idle-timeout timer.
Use the undo ftp timeout command to restore the default.
After you log in to an FTP server, an FTP connection is established. When the connection is disrupted,
the FTP server, if not notified, cannot realize that and thus maintains the connection. To address this
problem, you can set an idle-timeout timer so that the FTP server can disconnect from the user if no
information is received or/and transmitted before the timer expires.
2-4