Ftp Update; Ftp Client Configuration Commands - 3Com S7906E Command Reference Manual

Examples
# Set the idle-timeout timer to 36 minutes.
<Sysname> system-view
[Sysname] ftp timeout 36

ftp update

Syntax
ftp update { fast | normal }
undo ftp update
View
System view
Default Level
3: Manage level
Parameters
fast: Fast update.
normal: Normal update.
Description
Use the ftp update command to set the file update mode that the FTP server uses while receiving data.
Use the undo ftp update command to restore the default, namely, the normal mode.
Examples
# Set the FTP update mode to normal.
<Sysname> system-view
[Sysname] ftp update normal

FTP Client Configuration Commands

You must use the ftp command to enter FTP client view for configurations under this view. For
details, refer to ftp.
The prompt information in this section is that in the network where the 3Com S7900E series
Ethernet switches act as the FTP server. If you use other devices as the FTP server, PC for
example, the prompt information may be different.
2-5