Reset Saved-Configuration - 3Com S7906E Command Reference Manual

Examples
# Display the startup configuration file used at the current system startup and the one to be used at the
next system startup.
<Sysname> display startup
MainBoard:
Current startup saved-configuration file:
Next startup saved-configuration file:
Bootrom-access enable state:
Table 1-2 display startup command output description
Current Startup saved-configuration file
Next startup saved-configuration file

reset saved-configuration

Syntax
reset saved-configuration
View
User view
Default Level
2: System level
Parameters
None
Description
Use the reset saved-configuration command to delete the startup configuration file saved on the
storage medium of the device.
Note that:
This command will permanently delete the configuration file from the device. Use it with caution.
Related commands: save, display saved-configuration.
Examples
# Delete the currently running configuration file from the storage medium of the device.
<Sysname> reset saved-configuration
The saved configuration will be erased.
Are you sure? [Y/N]:y
Configuration in the device is being cleared.
Please wait .......
Configuration in the device is cleared.
Field
1-19
flash:/testcfg.cfg
flash:/testcfg.cfg
enabled
Description
The configuration file used for the current startup
The configuration file used for the next startup