File Prompt - 3Com S7906E Command Reference Manual

Description
Use the execute command to execute the specified batch file.
Batch files are command line files. Executing a batch file is to execute a set of command lines in the file.
You should not include invisible characters in a batch file. If an invisible character is found during
the execution, the batch process will abort and the commands that have been executed cannot be
cancelled.
Not every command in a batch file is sure to be executed. For example, if a certain command is not
correctly configured, the system omits this command and goes to the next one.
The configuration generated after a batch file is executed will not be backed up to the standby main
board automatically.
Each configuration command in a batch file must be a standard configuration command, meaning
that the valid configuration information can be displayed with the display current-configuration
command after this command is configured successfully; otherwise, this command may not be
executed correctly.
Examples
# Execute the batch file test.bat in the root directory.
<Sysname> system-view
[Sysname] execute test.bat

file prompt

Syntax
file prompt { alert | quiet }
View
System view
Default Level
3: Manage level
Parameters
alert: Enables the system to warn you about operations that may bring undesirable results such as file
corruption or data loss.
quiet: Disables the system from warning you about any operation.
Description
Use the file prompt command to set a prompt mode for file operations.
By default, the prompt mode is alert.
Note that when the prompt mode is set to quiet, the system does not warn for any file operation. To
prevent undesirable consequents resulting from misoperations, the alert mode is preferred.
Examples
# Set the file operation prompt mode to alert.
<Sysname> system-view
1-5