Table of Contents
Advertisement
Chapter 3 Reflectometry measurements
Configuring the reflectometry test
Figure 24
Color code definition
Project Information
Technician Id
Use the arrow
Job Id
Use the arrow
Comment
In contrast to the other data in this menu, the comment is specific to a fiber. This line is
thus used to enter a new comment and not to display it. The comment appears at the
top of the screen, with the other parameters of the fiber.
This comment will remain available for the next acquisition, unless it is deleted. It is also
saved when a trace is saved with a comment.
Configuring the File parameters
The File storage parameters must be also configured, in order to define how the results
traces will be saved onto the T-BERD/MTS.
In the Setup page, press Set Report softkey (if one parameter is selected in the current
screen, press Top Menu soft key to display the right menu keys and click on Set
Report).
48
to enter the name of the operator carrying out the measurement.
to enter a description of the measurement to be performed.
User Manual
78000010220 Rev. 024
Advertisement
Table of Contents
Troubleshooting
