Reflectometry measurements
Chapter 3
Pressing the S
However, it is necessary to configure the measurement and the type of results desired.
This chapter describes the different stages in a reflectometry measurement made using
an OTDR module.
The topics discussed in this chapter are as follows:
•
"Activating the OTDR function" on page 26
•
"Configuring the reflectometry test" on page 28
•
"Traffic Detection and connection quality indicator" on page 56
•
"Performing OTDR acquisitions" on page 57
•
"Saving results for Smart Test acquisitions" on page 65
•
"Advanced functions in Expert OTDR mode" on page 85
•
"Saving the trace(s) and generating a report" on page 100
•
"Enterprise-SLM Software option (T-BERD/MTS-6000A V2 only)" on page 106
•
"OptiPulses option" on page 123
•
"FTTA-SLM option" on page 125
•
"FTTH-SLM Software option" on page 142
•
"Smart Link Cable Option" on page 157
/S
key is all that is needed to start or stop a measurement.
TART
TOP
User Manual
78000010220 Rev. 024
3
25