Viavi 8100 V2 Series User Manual page 275

Figure 139 Fast report configuration
a In the Save Mode parameter, select:
txt file
pdf file
b In the Cable Id parameter, enter/modify the name of the Cable using the
edition keypad.
c Modify the Fiber Number / Fiber Code using the key
The parameter is different according to the Cable Structure configuration
(see
d In the Direction parameter, select/modify the direction, to define if the
measurement has been performed from Origin to Extremity (A -> B) or from
Extremity to Origin (B -> A).
e In the Location A and Location B parameters, enter/modify the name of
Origin and Extremity.
3 Once saving is configured as wished, press Save All menu key
4 Enter a name for the file in the edition keypad.
or
Press Auto Filenaming to apply the file name defined in the Setup screen, in
Filenaming parameter (see
5 Press Enter to validate.
NOTE
The blts file and the txt or pdf file will have the same name.
The icon
select Yes to save the results in a blts file and to generate a
txt file of the results.
select Yes to save the results in a blts file and to generate a
report in a pdf file.
"Cable structure" on page
"Filenaming" on page
displays during saving process.
User Manual
Chapter 7 FiberComplete Modules
Saving results and generating a report
45).
229).
78000010220 Rev. 024
.
239