Transportation; Configuration Of The Instrument - Viavi 8100 V2 Series User Manual

Chapter 9 OSCA-710 Optical Spectrum Measurement

Transportation

Transportation
The OSCA can be damaged by excessive acceleration during transpor-
tation with improper packaging.
Modules without a MTS / T-BERD should be shipped only in the origi-
nal packaging.
For shipping of a MTS / T-BERD 8000 V2 containing an OSCA, use
either the original packaging with the black rubber foam, or the trans-
portation case referenced E80HCASE-OSA.
Using the original packing material ensures that the device is properly
protected during shipping. Otherwise, VIAVI cannot give warranty on
modules good protection.
If you need a new packaging, please contact Viavi Technical Assis-
tance Center.

Configuration of the instrument

The instrument configuration menu will be displayed directly after power up or by
pressing the H
The actual module status will be shown (ON/OFF) on system window
1 For configuring the OSCA press the OSCA-icon (by touchscreen), or select the
function icon by arrow-keys and press E
2 Press R
If the MTS / T-BERD 8000 V2 is switched Off in this configuration, the next start
up will directly start the to OSCA-application, and display the result window.
For more details about the general MTS / T-BERD- configuration see the 8000 V2 Plat-
forms user manuals.
For measurement, connect the fiber to be tested on the optical input of the selected
module.
NOTE
Consider the maximum optical input power for OSCA.
308
-button.
OME
button to see the OSCA-result window.
ESULT
User Manual
.
NTER
78000010220 Rev. 024