Link Parameters; File Parameters - Viavi 8100 V2 Series User Manual

Chapter 7 FiberComplete Modules
Configuring the units
NOTE
If Fiber View is selected, and if results are stored, then the filenaming con-
vention is; [fiber Id][fiber Num]. Therefore, the unit will generate one IL / OLR
/ Distance file per fiber.
• Cable
NOTE
If Cable View is selected, and if results are stored, then the filenaming con-
vention is; [cable ID]. Therefore, the unit will generate one IL / OLR / dis-
tance file per complete cable.

Link parameters

In the Setup page, press Link softkey (if one parameter is selected in the current screen,
press Top Menu soft key to display the right menu keys and click on Link).
See "Configuring the Link parameters" on page

File parameters

The File storage parameters must be also configured, in order to define how the results
traces will be saved onto the Product Name/Family Brand.
In the Setup page, press File softkey (if one parameter is selected in the current screen,
press Top Menu soft key to display the right menu keys and click on File).
The following parameters defined in the Setup > File page of the mas-
ter unit are automatically applied/transferred to the slave unit: File-
naming - Save mode.
See "Configuring the File parameters" on page
228
displays cable result of multiple fibers: the average loss and
the ORL A and ORL B at each wavelength. See
on page 234.
User Manual
43.
48, except for Filenaming parameter.
78000010220 Rev. 024
"Cable view"