Chapter 3 Reflectometry measurements
Saving results for Smart Test acquisitions
The Recording Information page displays
Figure 35
Save results in Smart Test mode
2
Click on one parameter configuration (white background) to modify it using the
edition or numeric keypad displayed:
–
–
–
–
NOTE
The file is saved automatically by default with the Job Id parameter.
Example: if the Job Id is defined with Test Fiber 1, the otdr filename will be
Test Fiber 1.sor.
66
Fiber Id: click on the fiber name currently defined to display the edition
keypad and enter a new fiber name.
Fiber Number; click on the fiber number currently defined to display the
numeric keypad and enter a new fiber number.
Location A / Location B: click on the location name currently defined to
display the edition keypad and enter a new name.
Job Id: click on the Job description currently defined to display the edition
keypad and enter a new description.
User Manual
78000010220 Rev. 024