Table of Contents
Advertisement
2
Select one parameter in one of the setup page (acquisition, link..)
3
Press Save Config. menu key
4
Enter a name for the configuration file using the edition keypad (max 20 charac-
ters).
NOTE
Configuration file is saved in the directory disk/config/AP.
5
Press Enter to validate
A sound is emitted to indicate the file is saved.
The configuration file is saved with the extension ".fo_cfg" (icon
recalled at any time from the Explorer page.
AP Reference Measurement
On the measurement examples below, only the OBS-5XX is described. However, it can
be replaced by E81BBSXX.
Performing the reference
It is recommended to perform a broadband source referencing once a day or each time
the fiber patchcord has to be changed.
NOTE
When a reference is performed, acquisition parameters are not taken in
account.
To make a reference, connect your OBS-5XX or BBS to the test module just like shown
on figure below.
User Manual
Chapter 13 Attenuation profile
78000010220 Rev. 024
AP Reference Measurement
) and can be
413
Advertisement
Table of Contents
Troubleshooting
