Acquisition Parameters - Viavi 8100 V2 Series User Manual

Portable, modular platform designed for the construction, validation and maintenance of optical fiber networks

Hide thumbs Also See for 8100 V2 Series:

Table of Contents

Chapter 11 I-PMD Measurement

I-PMD Activation and Configuration

Acquisition parameters

In the Setup screen,

First, select PMD/I-OSNR on the parameter Mode,

Then select the following parameters for acquisition:

Select the acquisition mode in the parameter:

HR OSA Acquisition will be performed on a given frequency range (see sweep range

menu to a complete description). In this mode, OSNR are measured «out band».

Channel Frequency

If Channel is selected in the Mode parameter, adjust the frequency of the channel to

analyze (using the Edit Number menu key).

The Wavelength parameter is automatically configured according to channel

frequency defined.

If Sweep mode is selected in the Mode parameter, select the frequency range in this

Acquisition will be performed on one G.694.1 Channel

Acquisition will be performed on multiple channels defined in a grid

Acquisition will be performed with BBS inserted, instead of Transmis-

sion signals (intrusive measurement, network should be down and

replaced by a BBS module - see

Full frequency range is used for measurement

Select manually the Start/End frequency

Select manually the Center/Span frequency

Chapter 15 "Broadband source

78000010220 Rev. 024