Table of Contents
Advertisement
Chapter 18 OFI Module
FOX Function
Figure 261
Adjustment of the ORL Zero
Once the reference has been taken, the reference screen is updated for the
wavelengths available on the local instrument. It indicates the type of reference
used.
Once the two references are complete, the date as well as the type and
serial number of the local instrument are displayed on the first line of the
table.
If not, the message Ref ORL : Incomplete is displayed.
Measurement acquisition
Before making an automatic FOX measurement, check that:
•
both MTS 8000s (local and distant) as well as the OFI module on each instrument
are powered on and the FOX function selected.
•
the FOX function is correctly configured (S
•
each end of the fiber is correctly connected to the module.
•
the fiber and jumpers are in good condition.
To display the fiber measurement page, push the R
The page displays:
•
Both instruments connected to the link (l
512
User Manual
menu).
ETUP
ESULTS
ocal and distant).
78000010220 Rev. 024
key.
Advertisement
Table of Contents
Troubleshooting
