Viavi 8100 V2 Series User Manual page 516

Chapter 17 Fiber Characterization
Fiber Characterization Automated Test Sequence using the Link Characterization Script
Launching the Link Characterization script
1 Press the S
2 Select the function Scripts > Link Characterization using touchscreen or stylus
3 Press the soft key Launch to enter the script configuration menu..
Configuring the Test Setup
The available test functions are listed in black in Test Setup window
1 Check the test functions to include in the characterization sequence as follow
Figure 240 Test sequence configuration on 8000 V2
Configuring the Job Type & Link Description
The Job Type window enables to define how the product is going to organize the results
and what type of characterization test sequence is performed.
The Link Description window enables to document the information, related to the link
being tested.
1 Check Fiber Span testing is defined in Job Type parameter.
2 Enter Link Description on both units
Make sure they are both identical for test documentation consistency.
480
hard key on the 8000 V2
CRIPT
User Manual 78000010220 Rev. 024