Loading An Existing Otdr Configuration File - Viavi 8100 V2 Series User Manual

Chapter 3 Reflectometry measurements
Configuring the reflectometry test
Figure 27 Save Configuration file - Edition keypad
Directory into
which file is saved
NOTE
Configuration file is saved in the directory config, into the disk.
5 Press Enter to validate
A sound is emitted to indicate the file is saved.
The configuration file is saved with the extension ".fo_cfg" (icon
recalled at any time from the Explorer page.
This configuration file can be selected in Smart Test (see
file" on page

Loading an existing OTDR configuration file

To load a configuration file previously created or available in the T-BERD/MTS and apply
parameters to new OTDR Expert tests:
From the File Explorer page
1 Press F
2 Select the configuration file desired
3 Press
54
29) or loaded for Expert OTDR.
hard key
ILE
Load > Load Config.
User Manual 78000010220 Rev. 024
) and can be
"Selecting the configuration