Chapter 11 I-PMD Measurement
Performing a PMD Measurement with BBS and IPMD Module
3
Select the I-PMD function in the Home page and wait for the module self calibra-
tion (tuning).
4
Press the S
page
5
Select the BBS mode in the Setup menu in the Mode parameter.
6
Configure the other parameters as wished.
7
Press the S
Figure 189
I-PMD measurement with a BBS module
OBS-5XX
Display of results
The key
Osa / PMD
•
The optical spectrum of the BBS
or
•
The PMD results page, including the statistical measurements (see description on
Figure 188 on page
OSA Results
1
Check Osa function is selected on the menu key
A results page as the following one is displayed:
376
button to access the IPMD Test Setup menu (see
ETUP
359).
/S
button and wait for the results to be displayed.
TART
TOP
fiber patchcords
enables you to display either:
374).
User Manual
Fiber under test
78000010220 Rev. 024
Figure 179 on
Optical connector of
the 81IPMD Module
.