Ready to start Measurement
The message is displayed after the completion of an acquisition sample or a Reference
measurement.
Waiting bar graph
When
Statistic
remaining time before the next acquisition.
Saving the trace and generating a report
Once the results page is displayed, the trace can be saved and a report can be gener-
ated directly from the results screen.
Saving results and creating a report from results page
This function is available exclusively in FTT view, in the results page. If
Drift or Bar chart view is selected (in statistic mode), the report can be
generated but will be generated for FTT view.
To generate a report:
1
Select FFT view with the menu key
results).
2
Press Fast Report menu key
A menu displays under the trace.
3
In the menu, configure the file saving (and the report).
Chapter 10 Polarization Mode Dispersion Measurement
mode is used and
Long term
User Manual
Saving the trace and generating a report
is set to Period, a bargraph displays, the
(or menu key
.
78000010220 Rev. 024
with statistics
351