Configuring the LTS
To activate the function:
1
Press the S
2
Validate the Powermeter icon
The effect of this action will be to bring the power meter and source into use.
Figure 255
Configuration of power measurement
Configuring the alarm parameters
Alarm
Lower and upper thresholds
NOTE
To copy one value of the Lower or/and Upper threshold for all wavelengths,
select the reference value and click
button.
YSTEM
See OTDR Setup:
File parameters" on page 48
Activation of the Alarm function : any result below the lower
threshold or above the upper threshold will be displayed in red on the
Results page.
Choice of lower and upper thresholds for each available wavelength,
from -60 to +40 dBm.
User Manual
and the Source icon
"Configuring the
Update for All
78000010220 Rev. 024
Chapter 18 OFI Module
LTS function
.
See OTDR Setup:
"Configuring the Link
parameters" on
page 43
Wavel..
499