Viavi 8100 V2 Series User Manual page 209

The 8 lines table gives the type and the characteristics of all the events detected
during the measurement: the 8 first lines displayed correspond to the 8 first
events nearest to the cursor. The line corresponding to the event nearest to the
cursor is highlighted. This highlighting moves if the cursor is moved.
Once Trace is selected, press validation key
8 lines to Trace + results table on 1 line, and vice-versa
The table with one line displayed under the trace gives the type and characteris-
tics of the event nearest to the cursor.
Figure 106 Trace results
At the top of the table, a line shows the generic parameters of the fiber: numbers of
events present and the total ORL of the link.
Each event is referenced under the trace by a number which is repeated in the first
column of the table. The table then shows:
• icon symbolizing the type of the event:
Receive cable Start
Launch cable End: the attenuation and distances are measured on the basis of
the corresponding marker.
Non-reflective attenuation (e.g. splice).
Splitter.
Chapter 4 Reduced Dead Zone OTDR application
User Manual
to pass from Trace + results table on
78000010220 Rev. 024
Results display
173