Chapter 13 Attenuation profile
Saving the trace and generating a report
: the table only
Figure 208
AP Profile -Results table
The results table provides, for each wavelength (calculated using the wavelength range
and the incrementation parameter as seen in
tion profile in dB/km and the total loss in dB.
Saving the trace and generating a report
Once the results page is displayed, the trace can be saved and a report can be gener-
ated directly from the results screen.
Saving results and creating a report from results page
This function is available exclusively in Profile view, in the results
page.
To generate a report:
1
Select Profile view with the menu key Spectrum/Profile.
2
Check the results are not displayed in Table mode exclusively, otherwise the
report cannot be generated (Fast Report menu key is not available).
3
Press Fast Report menu key
422
User Manual
"Wavelength" on page
.
78000010220 Rev. 024
412), the attenua-