Viavi 8100 V2 Series User Manual page 293

Table 6 Grid menu options for each type of grid
ITU CWDM
First ITU
1270 to 1611 nm,
channel (with
display in nm)
Channel
spacing
Number of
channels
Sub-menu acces-
Channel
settings
NOTE
The maximum real number of channels for ITU grids depends on the value
selected for the first channel and the spacing between the channels.
NOTE
It is possible to display the grid with the View Grid key. A table then appears
showing the channel number, the name of the channel, the reference wave-
length and the alarm thresholds for delta F, min. P, max. P and min. SNR.
Editable, from
by increments of
20 nm
20 nm
Editable, from 1
to 18 by incre-
ments of 1
sible to display
the wavelengths
of each channel,
name the band,
and name each
channel
User Manual
Chapter 8 Optical Spectrum Measurement
ITU DWDM
Editable, from
1250.05 to 1649.93
nm, by increments
corresponding to the
channel spacing
selected
Editable, from 25 to
200 GHz
Editable, from 1 to
256 by increments of
1
Sub-menu accessi-
ble to display the
wavelengths of each
channel, name the
band, and name
each channel
78000010220 Rev. 024
OSA optical spectrum analyzer Setup
Regular
Editable from
1250 to 1650 nm,
by increments of
0.01 nm.
Editable from 20
to 1000 GHz by
increments of 1
at each click, of
10 if key is held
down
Editable, from 1
to 256 by incre-
ments of 1
Sub-menu
accessible to dis-
play the wave-
lengths of each
channel, name
the band, and
name each chan-
nel
Manual
N/A
N/A
Editable from 1
to 256
Sub-menu
accessible to
display the
wavelengths of
each channel,
name the band,
and name each
channel
257