Table of Contents
Advertisement
Chapter 3 Reflectometry measurements
Enterprise-SLM Software option (T-BERD/MTS-6000A V2 only)
6
Press Yes to launch a new acquisition or No to stop the acquisition and return to
project screen.
Stopping the test
The test stops automatically once the label/fiber test is completed; or the user can press
the Start/Stop button at any time to stop the test in progress.
In this case, the icon
have been tested.
Trace saving
The traces are automatically stored into the project directory and according to defined
filenaming convention.
Results of project
After each fiber/label tested, the project page is updated, on the fly.
Figure 62
Enterprise OTDR - Project
Description of the table
The status for each label is indicated on the right of the label row:
120
is displayed on the label row to indicate that not all of the fibers
User Manual
78000010220 Rev. 024
Advertisement
Table of Contents
Troubleshooting
