Project Display - Viavi 8100 V2 Series User Manual

Portable, modular platform designed for the construction, validation and maintenance of optical fiber networks

Hide thumbs Also See for 8100 V2 Series:

Table of Contents

Once all parameters are configured, press Save Config. to save the current

configuration in a file.

Press Import Label List top right soft key.

Select the csv file that includes the list of labels / Cable Ids to be tested:

Simplex: 1 label = 1 fiber

Duplex: 1 label = 2 fibers

MPO: 1 label = up to 24 fibers

Press Create Project menu key to generate the project.

The project displays, with the list of labels defined in the csv file.

If the list of labels exceeds the maximum number of labels authorized by the

software (1000 fibers / 500 for Duplex / 83 for MPO (12) / 41 for MPO (24)),

a warning displays: Label max numbers reached, next labels

are ignored. Hit any key to continue.

Warnings on CSV file

The csv file used for labeling must include the following instructions:

1 label per line, starting from row 1 of the spreadsheet.

the number of characters per label cannot exceed 120.

avoid the use of special characters, such as: *; /; \; %; &; #...

Project display

Once the project is loaded on the Platform, it is displayed as follows:

Enterprise-SLM Software option (T-BERD/MTS-6000A V2 only)

Chapter 3 Reflectometry measurements

78000010220 Rev. 024