Display; Saving Configuration In A File - Viavi 8100 V2 Series User Manual

Chapter 13 Attenuation profile
AP Activation and self calibration

Display

Wavelength
It enables to configure the range of wavelengths to be displayed on the graph and in the
table of results.
Full
S+C+L Band
C+L Band
Manual
ITUCWDM
ITUDWDM
Channel spacing can be fixed at: 25 GHz, 50 GHz, 100 GHz or 200 GHz.
Telecom
Inc.Wavelength
Defines the spacing between 2 consecutive measurement points displayed on the graph
and in the table of results.
Normalized to km
No
Yes

Saving configuration in a file

Once parameters have been configured, they can be kept in memory and saved in a
configuration file.
This configuration file can then be recalled in order to be recalled for future AP acquisi-
tions.
To save parameters in a configuration file:
1 If necessary, press S
412
Displays results along the full available wavelength range
Displays results along S, C + L bands.
Displays results along C + L bands.
Displays results between 2 user defined wavelengths. The user must
then select the <start> and <end> wavelengths.
Displays the ITU-T G.694.2 CWDM channels exclusively
Displays the ITU-T G.694.1 DWDM channels exclusively
Displays 4 wavelengths: 1310 / 1480 / 1550 / 1625 nm
The AP result is provided in dB only.
The AP result is also provided in dB/km (calculated according to fiber
length).
to return to Setup page.
ETUP
User Manual 78000010220 Rev. 024