Fiber Characterization Automated Test Sequence using the Link Characterization Script
Configuring the test sequence
Check the test functions to include in the characterization sequence as follow
Configuring the test sequence on the T-BERD/MTS 8000 V2
Figure 244
Test sequence configuration on 8000 V2
Configuring the test sequence on the T-BERD/MTS 6000A
V2
Figure 245
Test sequence configuration on 6000A
To perform the characterization with automatic method, check the parameter Full auto
test (Datalink) is selected on both units.
User Manual
Chapter 17 Fiber Characterization
78000010220 Rev. 024
485