Analysis Parameters - Viavi 8100 V2 Series User Manual

Portable, modular platform designed for the construction, validation and maintenance of optical fiber networks

Hide thumbs Also See for 8100 V2 Series:

Table of Contents

Chapter 8 Optical Spectrum Measurement

OSA optical spectrum analyzer Setup

The Wait Period parameter allows to enter a wait period before the measurement start

(only active if Long Term is positioned on Period)

Increments of 5 seconds up to 1 minute, then increments of 1 minute up to 10

minutes, then increments of 5 minutes up to 60 minutes; then increment of 1 hour

up to 24 hours.

Monitoring Time (for Drift Measurement only)

For Drift Measurement a monitoring time may be selected between 1 minute and 20

Interval (for Drift Measurement only)

The interval time between the measurements. The limits depend on the monitoring time.

Analysis parameters

In the Setup page, press Analysis softkey (if one parameter is selected in the current

screen, press Top Menu soft key to display the right menu keys and click on Analysis).

Those parameters are only linked to the current active fiber.

The measurement is done manually, once the key

The measurement is automatically done, after the wait period

selected (see hereunder).

78000010220 Rev. 024