Chapter 3 Reflectometry measurements
Enterprise-SLM Software option (T-BERD/MTS-6000A V2 only)
3
Click on
4
Click on
The selected file is opened
For further informations on file management, see
Enterprise-SLM Software option (T-BERD/MTS-
6000A V2 only)
This chapter describes the use of the Enterprise-SLM option, when the software license
has been purchased with an OTDR module.
Principle of Enterprise-SLM
The Enterprise-SLM is designed to simplify and automate the characterization (TIER-2)
and troubleshooting of structured cabling in Enterprise & Data Centers.
Goals of this function are to:
•
characterize/certify the entire link including passive elements such as connectors,
cassettes, splices, couplers or splitters, at the installation
•
be used as a troubleshooting tool to detect faults such as breaks, bends or exces-
sive losses
•
generate all-in-one PDF certification reports on site for each fiber link
Configuring the Enterprise-SLM
Loading a SmartConfig
The SmartConfig™ is defined with pre-defined test settings to be used as a base config-
uration that can be customized.
Once the Enterprise-SLM license is installed:
1
From the Home page, select the Otdr Entreprise function
2
Press S
3
Press Load Config. to select a configuration file from the list:
106
Load
View Tace(s)
or
Load Trace + Config.
hard key to display the OTDR configuration screen.
ETUP
User Manual
Chapter 20 "File
™
78000010220 Rev. 024
management".
.