Saving Configuration In A File - Viavi 8100 V2 Series User Manual

Portable, modular platform designed for the construction, validation and maintenance of optical fiber networks

Hide thumbs Also See for 8100 V2 Series:

Table of Contents

Chapter 14 CD measurements using phase shift method

Configuring the CD test

This parameter cannot be configured if, in Measurements box, the parame-

ter Fiber Length is defined to Unknown.

Inc.Wavelength

Defines the spacing between 2 consecutive measurement points displayed on the graph

and in the table of results.

Measurement Points

Displays the acquisition points on the Delay curve (represented by black crosses).

Show approximation formula

Displays the resulting approximation equation and the correlation coefficient on the

upper left side of the trace.

Saving configuration in a file

Once parameters have been configured, they can be kept in memory and saved in a

configuration file.

This configuration file can then be recalled in order to be recalled for future CD acquisi-

To save parameters in a configuration file:

If necessary, press S

Displays results between 2 user defined wavelengths. The user must

then select the inf. wavelength to "start" with and the sup. wave-

length to "end" with.

All the acquisition points are displayed.

No acquisition points visible

Equation is displayed.

Equation is not visible.

to return to Setup page.

78000010220 Rev. 024