Fiber Link Check - Viavi 8100 V2 Series User Manual

Chapter 6 Bi-directional OTDR
Performing a bi-directional measurement
1 Measurement status zone:
When a bi-directional measurement has been launched, all the different steps in the
measurement process are presented in this zone. Each one is detailed later in this
chapter.
NOTE
The general information banner is displayed at the top of the screen as for all
other tabs. When a OEO measurement is performed, Data
played as soon as a data connection is established.
Figure 117 Process page display (with two T-BERD 8000 V2)
Information
zone
User guide
zone
Measurement
status zone
Identifier of the origin or end of the fiber
according to the direction OE or EO

Fiber link check

To ensure that the two units are connected to the same fiber under test, select
same fiber. If the fiber is the same at both extremities, a
on the measurement status zone.
202
Data connection status
Information
concerning local unit
User Manual
Fiber connection status
78000010220 Rev. 024
icon is dis-
Information concerning
remote unit
symbol will be displayed
Check